USB TO TTL (D) Adapter Waveshare 26738
USB TO TTL (D) Adapter Waveshare 26738
SKU: 2685
In stock
Couldn't load pickup availability
| Warranty 12 months. Return or exchange within 14 days → | |
| Delivery Nova Poshta to branch/locker or courier to your address → | |
| Payment Pay on delivery or prepayment → |
Description
Original FT232RNL | Stable Transmission | Multiple Devices | Supports Various Systems
Suitable for industrial equipment serial port debugging, supports Raspberry Pi 5
The industrial USB to TTL serial cable uses an original FT232RNL chip, has built-in power and signal indicators, supports 3.3V/5V voltage level switching, and is equipped with a self-recovery fuse, ESD, and IO protection circuits. Its compact size makes it convenient for debugging industrial equipment serial ports and direct connection to Raspberry Pi 5.
| Product Category | Industrial USB to TTL Serial Cable |
|---|---|
| Chip | Original FTDI FT232RNL |
| Host Port | USB |
| Data Rate | 300 bps ~ 3 Mbps |
| Device Port | UART |
| USB Port | Connector: USB-A |
| Protection: Self-recovery fuse, ESD protection | |
| UART Port | Connector: Separate 4-pin female header + SH1.0 3PIN shielded connector |
| Protection: IO protection diode | |
| Indicators | PWR: Power indicator, lights up when USB is connected and voltage is present |
| TXD: Transmit indicator, lights up when data is transmitted via the USB port | |
| RXD: Receive indicator, lights up when data is sent by the device | |
| Cable | Black, PVC sheath, total length 1m |
Uses original FT232RNL chip for better stability and compatibility
Suitable for Raspberry Pi, supports various connection methods
Connecting to the PI5 UART Debug connector via SH1.0 3PIN cable
Connecting to Raspberry Pi's 40PIN GPIO UART interface via a separate 4PIN header
* For reference only. Raspberry Pi 5 is not included.
Compatible with popular systems: Win7/8/8.1/10/11, Mac, Linux, Android
Easy identification of working status, convenient for programming and debugging
| VCC | 3.3V or 5V output, set by switch |
|---|---|
| GND | Ground |
| TXD | Connects to MCU.RXD (signal direction: MCU.RX << FT232 << PC.TX) |
| RXD | Connects to MCU.TXD (signal direction: MCU.TX >> FT232 >> PC.RX) |
* Dimensions are measured manually and may have slight errors
| Model Number | USB TO TTL | USB TO TTL (B) | USB TO TTL (C) | USB TO TTL (D) |
|---|---|---|---|---|
 |
||||
| Product Category | Industrial USB to TTL Converter | Industrial USB to TTL Serial Cable | ||
| Chip | FT232 | CH343G | FT232 | |
| Data Rate | 300 bps ~ 3 Mbps | 50 bps ~ 6 Mbps | 300 bps ~ 3 Mbps | |
| Hardware Flow Control | Supported | Not supported | ||
| OS Support | Win7/8/8.1/10/11, Mac, Linux, Android | |||
| USB Port |
Connector: USB-A Protection: Self-recovery fuse, ESD protection |
|||
| UART Port |
Connector: 8PIN fool-proof header Protection: IO diode |
Connector: Separate 6pin female header Protection: IO diode |
Connector: Separate 4pin female header + SH1.0 3PIN fool-proof connector Protection: IO diode |
|
| Indicators |
PWR: Power indicator TXD: Transmit data indicator RXD: Receive data indicator |
|||
Description
Original FT232RNL | Stable Transmission | Multiple Devices | Supports Various Systems
Suitable for industrial equipment serial port debugging, supports Raspberry Pi 5
The industrial USB to TTL serial cable uses an original FT232RNL chip, has built-in power and signal indicators, supports 3.3V/5V voltage level switching, and is equipped with a self-recovery fuse, ESD, and IO protection circuits. Its compact size makes it convenient for debugging industrial equipment serial ports and direct connection to Raspberry Pi 5.
| Product Category | Industrial USB to TTL Serial Cable |
|---|---|
| Chip | Original FTDI FT232RNL |
| Host Port | USB |
| Data Rate | 300 bps ~ 3 Mbps |
| Device Port | UART |
| USB Port | Connector: USB-A |
| Protection: Self-recovery fuse, ESD protection | |
| UART Port | Connector: Separate 4-pin female header + SH1.0 3PIN shielded connector |
| Protection: IO protection diode | |
| Indicators | PWR: Power indicator, lights up when USB is connected and voltage is present |
| TXD: Transmit indicator, lights up when data is transmitted via the USB port | |
| RXD: Receive indicator, lights up when data is sent by the device | |
| Cable | Black, PVC sheath, total length 1m |
Uses original FT232RNL chip for better stability and compatibility
Suitable for Raspberry Pi, supports various connection methods
Connecting to the PI5 UART Debug connector via SH1.0 3PIN cable
Connecting to Raspberry Pi's 40PIN GPIO UART interface via a separate 4PIN header
* For reference only. Raspberry Pi 5 is not included.
Compatible with popular systems: Win7/8/8.1/10/11, Mac, Linux, Android
Easy identification of working status, convenient for programming and debugging
| VCC | 3.3V or 5V output, set by switch |
|---|---|
| GND | Ground |
| TXD | Connects to MCU.RXD (signal direction: MCU.RX << FT232 << PC.TX) |
| RXD | Connects to MCU.TXD (signal direction: MCU.TX >> FT232 >> PC.RX) |
* Dimensions are measured manually and may have slight errors
| Model Number | USB TO TTL | USB TO TTL (B) | USB TO TTL (C) | USB TO TTL (D) |
|---|---|---|---|---|
|
||||
| Product Category | Industrial USB to TTL Converter | Industrial USB to TTL Serial Cable | ||
| Chip | FT232 | CH343G | FT232 | |
| Data Rate | 300 bps ~ 3 Mbps | 50 bps ~ 6 Mbps | 300 bps ~ 3 Mbps | |
| Hardware Flow Control | Supported | Not supported | ||
| OS Support | Win7/8/8.1/10/11, Mac, Linux, Android | |||
| USB Port |
Connector: USB-A Protection: Self-recovery fuse, ESD protection |
|||
| UART Port |
Connector: 8PIN fool-proof header Protection: IO diode |
Connector: Separate 6pin female header Protection: IO diode |
Connector: Separate 4pin female header + SH1.0 3PIN fool-proof connector Protection: IO diode |
|
| Indicators |
PWR: Power indicator TXD: Transmit data indicator RXD: Receive data indicator |
|||
