CAN FD TO RS232/RS485 Adapter Waveshare 32599
CAN FD TO RS232/RS485 Adapter Waveshare 32599
SKU: 1086
In stock
Couldn't load pickup availability
| Warranty 12 months. Return or exchange within 14 days → | |
| Delivery Nova Poshta to branch/locker or courier to your address → | |
| Payment Pay on delivery or prepayment → |
Description
CAN FD Protocol Converter
Key Features
CAN FD TO RS232/RS485 is a bidirectional CAN FD to RS232/RS485 converter for DIN rail mounting, providing high-speed, low-latency, and stable operation. The device is easy to use and cost-effective.
Supports five data conversion modes:
- Transparent conversion
- Transparent conversion with ID
- Standard protocol conversion
- Modbus protocol conversion
- Custom protocol conversion
Enables interaction between CAN devices and serial ports, compatible with CAN FD and CAN 2.0A/2.0B protocols.
Industrial-grade design, stable operation from -40°C to 85°C, wide power range of 9V–36V, CAN FD arbitration domain baud rate of 5Kbps–1Mbps, and data domain baud rate of 100Kbps–5Mbps.
Supports parameter configuration via host computer, built-in 120Ω termination resistors (switchable via DIP switches), supports DIN rail mounting, easy to set up and install.
Specifications
| Category | Parameter | Description |
|---|---|---|
| Parameters | Operating Voltage | DC 9V–36V, recommends 12V 1A |
| Dimensions | 110 × 27 × 85.6 mm | |
| Mounting Method | DIN rail mounting | |
| Reset Button | Long press to restore factory settings | |
| Indicator LEDs | POWER, WORK, COM, and CAN | |
| Interface Parameters | CAN Port Specification | 1-ch CAN port, supports CAN FD, compatible with CAN 2.0A/2.0B |
| CAN Port Baudrate | Arbitration domain: 5Kbps–1Mbps Data domain: 100Kbps–5Mbps |
|
| Termination Resistor | Built-in 2 × 120Ω termination resistors. Turning one DIP switch to ON connects one 120Ω resistor in parallel. Turning both to ON connects two 120Ω resistors in parallel | |
| Serial Port Specification | Supports 1-ch RS485 or RS232 | |
| Operating Environment | Operating Temperature | -40°C–85°C |
| Storage Temperature | -40°C–105°C | |
| Operating Humidity | 5%–95% RH (non-condensing) | |
| Storage Humidity | 5%–95% RH (non-condensing) | |
| Software Features | Modbus Gateway | CAN FD to Modbus RTU (Master/Slave) |
| Transmit Messages | Supports up to 64 transmit messages | |
| Receive Messages | Supports up to 64 receive messages | |
| Protocol Conversion | Transparent conversion, transparent conversion with ID, standard conversion, Modbus protocol conversion, and custom protocol conversion | |
| CAN ID | Supports standard frames and extended frames | |
| Frame ID Filtering | Supports standard frames only, extended frames only, and custom frame ID input (up to 32 groups) | |
| Conversion Direction | Supports bidirectional conversion, serial port to CAN only, and CAN to serial port only | |
| Firmware Upgrade | Supports firmware upgrade via host computer | |
| Parameter Configuration | AT commands and host computer software | |
| Protection Parameters | ESD Protection | Air discharge: 8 KV, contact discharge: 6 KV |
| EFT/Burst | Power circuit: 2KV; RS485/RS232 circuit: 1KV; CAN circuit: 1KV | |
| Surge Immunity Test | Power circuit: 1KV differential mode, 2KV common mode; CAN circuit: 2KV common mode |
Main Function
Supports bidirectional data transmission of CAN FD to RS232/RS485
Arbitration Domain Baudrate
CAN FD arbitration domain baudrate: 5Kbps–1Mbps
Data Domain Baudrate
CAN FD data domain baudrate: 100Kbps–5Mbps
Industrial Grade Design
Supports Multiple Conversion Modes
Transparent conversion, transparent conversion with ID, standard conversion, Modbus protocol conversion, and custom conversion with custom frame headers and trailers
Achieves original conversion between CAN FD frames and serial frames
Transmits ID information in serial frames to CAN FD frames
Conversion between 13-byte standard CAN frame format and 69-byte standard CAN FD frame format
Implements Modbus data transmission over the CAN bus through packet segmentation and reassembly
Users can customize frame headers and trailers to achieve bidirectional data conversion
3 Frame Filtering Methods, 32 Sets of Configurable Filters
Supports receiving extended frames only, receiving standard frames only, and custom frame ID reception. In custom mode, users can configure up to 32 sets of filtering methods to avoid a large amount of data interference
Parameter Configuration Via Host Computer
Application Scenarios
BMS Battery Monitoring
Industrial Automation
EV Charging
Traffic Monitoring
Interface Description
Outline Dimensions
CAN FD Converter Selection
| Model | CAN FD TO ETH | CAN FD TO RS232/RS485 | CAN FD ETH RS232/RS485 Converter |
|---|---|---|---|
| Product Type | CAN FD To ETH | CAN FD To RS485/RS232 | CAN FD To ETH/RS485/RS232 |
| CAN FD | Supported | ||
| EMC Protection | Level 3 | Level 3 | Level 3, full power/interface/communication isolation |
| External Structure | Aluminum profile, DIN rail | ||
| Conversion Modes | 5 | ||
| Frame ID Filtering | 32 groups | ||
| Modbus | Modbus TCP (Master/Slave) | Modbus RTU (Master/Slave) | Modbus TCP (Master/Slave) Modbus RTU (Master/Slave) |
Description
CAN FD Protocol Converter
Key Features
CAN FD TO RS232/RS485 is a bidirectional CAN FD to RS232/RS485 converter for DIN rail mounting, providing high-speed, low-latency, and stable operation. The device is easy to use and cost-effective.
Supports five data conversion modes:
- Transparent conversion
- Transparent conversion with ID
- Standard protocol conversion
- Modbus protocol conversion
- Custom protocol conversion
Enables interaction between CAN devices and serial ports, compatible with CAN FD and CAN 2.0A/2.0B protocols.
Industrial-grade design, stable operation from -40°C to 85°C, wide power range of 9V–36V, CAN FD arbitration domain baud rate of 5Kbps–1Mbps, and data domain baud rate of 100Kbps–5Mbps.
Supports parameter configuration via host computer, built-in 120Ω termination resistors (switchable via DIP switches), supports DIN rail mounting, easy to set up and install.
Specifications
| Category | Parameter | Description |
|---|---|---|
| Parameters | Operating Voltage | DC 9V–36V, recommends 12V 1A |
| Dimensions | 110 × 27 × 85.6 mm | |
| Mounting Method | DIN rail mounting | |
| Reset Button | Long press to restore factory settings | |
| Indicator LEDs | POWER, WORK, COM, and CAN | |
| Interface Parameters | CAN Port Specification | 1-ch CAN port, supports CAN FD, compatible with CAN 2.0A/2.0B |
| CAN Port Baudrate | Arbitration domain: 5Kbps–1Mbps Data domain: 100Kbps–5Mbps |
|
| Termination Resistor | Built-in 2 × 120Ω termination resistors. Turning one DIP switch to ON connects one 120Ω resistor in parallel. Turning both to ON connects two 120Ω resistors in parallel | |
| Serial Port Specification | Supports 1-ch RS485 or RS232 | |
| Operating Environment | Operating Temperature | -40°C–85°C |
| Storage Temperature | -40°C–105°C | |
| Operating Humidity | 5%–95% RH (non-condensing) | |
| Storage Humidity | 5%–95% RH (non-condensing) | |
| Software Features | Modbus Gateway | CAN FD to Modbus RTU (Master/Slave) |
| Transmit Messages | Supports up to 64 transmit messages | |
| Receive Messages | Supports up to 64 receive messages | |
| Protocol Conversion | Transparent conversion, transparent conversion with ID, standard conversion, Modbus protocol conversion, and custom protocol conversion | |
| CAN ID | Supports standard frames and extended frames | |
| Frame ID Filtering | Supports standard frames only, extended frames only, and custom frame ID input (up to 32 groups) | |
| Conversion Direction | Supports bidirectional conversion, serial port to CAN only, and CAN to serial port only | |
| Firmware Upgrade | Supports firmware upgrade via host computer | |
| Parameter Configuration | AT commands and host computer software | |
| Protection Parameters | ESD Protection | Air discharge: 8 KV, contact discharge: 6 KV |
| EFT/Burst | Power circuit: 2KV; RS485/RS232 circuit: 1KV; CAN circuit: 1KV | |
| Surge Immunity Test | Power circuit: 1KV differential mode, 2KV common mode; CAN circuit: 2KV common mode |
Main Function
Supports bidirectional data transmission of CAN FD to RS232/RS485
Arbitration Domain Baudrate
CAN FD arbitration domain baudrate: 5Kbps–1Mbps
Data Domain Baudrate
CAN FD data domain baudrate: 100Kbps–5Mbps
Industrial Grade Design
Supports Multiple Conversion Modes
Transparent conversion, transparent conversion with ID, standard conversion, Modbus protocol conversion, and custom conversion with custom frame headers and trailers
Achieves original conversion between CAN FD frames and serial frames
Transmits ID information in serial frames to CAN FD frames
Conversion between 13-byte standard CAN frame format and 69-byte standard CAN FD frame format
Implements Modbus data transmission over the CAN bus through packet segmentation and reassembly
Users can customize frame headers and trailers to achieve bidirectional data conversion
3 Frame Filtering Methods, 32 Sets of Configurable Filters
Supports receiving extended frames only, receiving standard frames only, and custom frame ID reception. In custom mode, users can configure up to 32 sets of filtering methods to avoid a large amount of data interference
Parameter Configuration Via Host Computer
Application Scenarios
BMS Battery Monitoring
Industrial Automation
EV Charging
Traffic Monitoring
Interface Description
Outline Dimensions
CAN FD Converter Selection
| Model | CAN FD TO ETH | CAN FD TO RS232/RS485 | CAN FD ETH RS232/RS485 Converter |
|---|---|---|---|
| Product Type | CAN FD To ETH | CAN FD To RS485/RS232 | CAN FD To ETH/RS485/RS232 |
| CAN FD | Supported | ||
| EMC Protection | Level 3 | Level 3 | Level 3, full power/interface/communication isolation |
| External Structure | Aluminum profile, DIN rail | ||
| Conversion Modes | 5 | ||
| Frame ID Filtering | 32 groups | ||
| Modbus | Modbus TCP (Master/Slave) | Modbus RTU (Master/Slave) | Modbus TCP (Master/Slave) Modbus RTU (Master/Slave) |
