Waveshare 22773 USB-CAN-B Adapter
Waveshare 22773 USB-CAN-B Adapter
SKU: 1083
Out of stock
This item is temporarily out of stock. Call (099) 381-5288 and we will tell you when it is back or suggest an alternative.
| Warranty 12 months. Return or exchange within 14 days → | |
| Delivery Nova Poshta to branch/locker or courier to your address → | |
| Payment Pay on delivery or prepayment → |
Description
USB to CAN Adapter, Dual-Channel CAN Analyzer, Industrial Isolation
USB to CAN Adapter
Key Features
The USB-CAN-B is an industrial-grade, high-performance USB to CAN adapter, CAN-bus interface card, and CAN protocol analyzer. It integrates two independent channels with electrical isolation and multiple protection circuits. It supports Windows and Linux systems, comes with drivers, CANTools software, secondary development examples, and learning materials. It can be connected to a PC or industrial controller via a USB port to achieve transceiver control, data analysis, acquisition, and monitoring of a CAN bus network. Its compact size and ease of use make it suitable for CAN bus learning and debugging, as well as secondary development and integration into various industrial, power communication, and intelligent control systems that require CAN bus communication.
Specifications
| Product Type | Industrial-grade: USB to CAN interface converter / CAN-bus communication interface card / CAN protocol analyzer | |
|---|---|---|
| USB | Power Supply Voltage | 5V (powered directly from USB port without external power supply) |
| Connector | USB-B | |
| CAN Interface | CAN Channels | Dual-channel: CAN1 and CAN2 (independent and isolated) |
| Connector | CAN bus screw terminal block (OPEN6 5.08mm pitch) | |
| Terminating Resistor | Each CAN channel has two built-in 120Ω resistors, which can be enabled by a switch | |
| Baud Rate | 10Kbps~1Mbps (configurable via software) | |
| Protocol Support | CAN2.0A, CAN2.0B, CANOpen, SAE J1939, DeviceNet, iCAN, ISO 15765 protocol | |
| Hardware Support | Single-wire CAN, high-speed CAN, low-speed/fault-tolerant CAN (CAN2 can be configured by software to high-speed CAN or low-speed/fault-tolerant CAN) | |
| Transmission Rate | Receive and transmit of each CAN channel can reach: 8500 frames/s | |
| Transmit Buffer | 2000 frames receive buffer and 1000 frames transmit buffer per channel (automatic retransmission on transmission failure) | |
| Indicators | PWR | Power indicator |
| SYS | System status indicator, normally off; lights up on bus error | |
| CAN1 | CAN1 channel indicator (blinks when transmitting and receiving data) | |
| CAN2 | CAN2 channel indicator (blinks when transmitting and receiving data) | |
| System Support | Windows | Windows XP/7/8/10/11 (32/64 bit) |
| Linux | Raspberry Pi OS, Ubuntu (Jetson Nano), VMware virtual PC and others | |
| Operating Temperature | -40~85℃ | |
| Housing Material | Aluminum alloy casing + 3D flame-retardant insulating sheets on both sides (this design provides better protection against metallic tip discharge, improves product safety, and extends service life) | |
| Dimensions | 104 x 70 x 25 mm | |
Supports USB to CAN Bus Protocol Conversion
Utilizes high-speed USB2.0 interface, backward compatible with USB 1.1 and USB 3.0
Dual-channel CAN bus interfaces support two-way transmission, can work independently without affecting each other
Configurable Baud Rate, Supports Automatic Detection
CAN baud rate is configurable in the range of 10Kbps-1Mbps
Supports baud rate calculation, automatic detection, and setting via configuration tool
Supports Decoding And Analysis Of Multiple CAN Protocols
Supports CAN 2.0A, CAN 2.0B, CANOpen, SAE1939, DeviceNet, iCAN, ISO 15765 protocols
Supports Single-Wire CAN, High-Speed CAN, And Low-Speed/Fault-Tolerant CAN
CAN2 can be configured as high-speed CAN or low-speed/fault-tolerant CAN via software
Supports Various Development Environments
Provides secondary development project examples for various mainstream development platforms: C++Builder, C#, VC, VB, VB.NET, Delphi, LabVIEW, LabWindows/CVI, Qt, Matlab, Python/Python-can, Qt examples under Linux
Supports Windows And Linux Systems
Supports Windows XP/7/8/10/11 and Linux systems such as Raspberry Pi OS and Ubuntu under Jetson Nano, provides corresponding driver libraries, development examples, and learning materials for easy entry and secondary development
High-Performance Hardware Solution
Adopts original Microchip controller and 32-bit MIPS M4K® core with up to 80MHz frequency, high performance, stability and reliability
High-Security Voltage Isolation
ADI high-speed magnetic isolation, 2500 VDC electrical isolation, USB, CAN1 and CAN2 triple-terminal full isolation, higher communication security and stability
One PC With Multiple Devices
Supports running multiple CAN analyzers on one PC simultaneously without mutual interference, up to 128 devices as tested. Suitable for monitoring multiple CAN networks simultaneously with a single monitoring device, or for data comparison and verification, etc.
Application Scenarios
Interface Introduction
Outline Dimensions
Description
USB to CAN Adapter, Dual-Channel CAN Analyzer, Industrial Isolation
USB to CAN Adapter
Key Features
The USB-CAN-B is an industrial-grade, high-performance USB to CAN adapter, CAN-bus interface card, and CAN protocol analyzer. It integrates two independent channels with electrical isolation and multiple protection circuits. It supports Windows and Linux systems, comes with drivers, CANTools software, secondary development examples, and learning materials. It can be connected to a PC or industrial controller via a USB port to achieve transceiver control, data analysis, acquisition, and monitoring of a CAN bus network. Its compact size and ease of use make it suitable for CAN bus learning and debugging, as well as secondary development and integration into various industrial, power communication, and intelligent control systems that require CAN bus communication.
Specifications
| Product Type | Industrial-grade: USB to CAN interface converter / CAN-bus communication interface card / CAN protocol analyzer | |
|---|---|---|
| USB | Power Supply Voltage | 5V (powered directly from USB port without external power supply) |
| Connector | USB-B | |
| CAN Interface | CAN Channels | Dual-channel: CAN1 and CAN2 (independent and isolated) |
| Connector | CAN bus screw terminal block (OPEN6 5.08mm pitch) | |
| Terminating Resistor | Each CAN channel has two built-in 120Ω resistors, which can be enabled by a switch | |
| Baud Rate | 10Kbps~1Mbps (configurable via software) | |
| Protocol Support | CAN2.0A, CAN2.0B, CANOpen, SAE J1939, DeviceNet, iCAN, ISO 15765 protocol | |
| Hardware Support | Single-wire CAN, high-speed CAN, low-speed/fault-tolerant CAN (CAN2 can be configured by software to high-speed CAN or low-speed/fault-tolerant CAN) | |
| Transmission Rate | Receive and transmit of each CAN channel can reach: 8500 frames/s | |
| Transmit Buffer | 2000 frames receive buffer and 1000 frames transmit buffer per channel (automatic retransmission on transmission failure) | |
| Indicators | PWR | Power indicator |
| SYS | System status indicator, normally off; lights up on bus error | |
| CAN1 | CAN1 channel indicator (blinks when transmitting and receiving data) | |
| CAN2 | CAN2 channel indicator (blinks when transmitting and receiving data) | |
| System Support | Windows | Windows XP/7/8/10/11 (32/64 bit) |
| Linux | Raspberry Pi OS, Ubuntu (Jetson Nano), VMware virtual PC and others | |
| Operating Temperature | -40~85℃ | |
| Housing Material | Aluminum alloy casing + 3D flame-retardant insulating sheets on both sides (this design provides better protection against metallic tip discharge, improves product safety, and extends service life) | |
| Dimensions | 104 x 70 x 25 mm | |
Supports USB to CAN Bus Protocol Conversion
Utilizes high-speed USB2.0 interface, backward compatible with USB 1.1 and USB 3.0
Dual-channel CAN bus interfaces support two-way transmission, can work independently without affecting each other
Configurable Baud Rate, Supports Automatic Detection
CAN baud rate is configurable in the range of 10Kbps-1Mbps
Supports baud rate calculation, automatic detection, and setting via configuration tool
Supports Decoding And Analysis Of Multiple CAN Protocols
Supports CAN 2.0A, CAN 2.0B, CANOpen, SAE1939, DeviceNet, iCAN, ISO 15765 protocols
Supports Single-Wire CAN, High-Speed CAN, And Low-Speed/Fault-Tolerant CAN
CAN2 can be configured as high-speed CAN or low-speed/fault-tolerant CAN via software
Supports Various Development Environments
Provides secondary development project examples for various mainstream development platforms: C++Builder, C#, VC, VB, VB.NET, Delphi, LabVIEW, LabWindows/CVI, Qt, Matlab, Python/Python-can, Qt examples under Linux
Supports Windows And Linux Systems
Supports Windows XP/7/8/10/11 and Linux systems such as Raspberry Pi OS and Ubuntu under Jetson Nano, provides corresponding driver libraries, development examples, and learning materials for easy entry and secondary development
High-Performance Hardware Solution
Adopts original Microchip controller and 32-bit MIPS M4K® core with up to 80MHz frequency, high performance, stability and reliability
High-Security Voltage Isolation
ADI high-speed magnetic isolation, 2500 VDC electrical isolation, USB, CAN1 and CAN2 triple-terminal full isolation, higher communication security and stability
One PC With Multiple Devices
Supports running multiple CAN analyzers on one PC simultaneously without mutual interference, up to 128 devices as tested. Suitable for monitoring multiple CAN networks simultaneously with a single monitoring device, or for data comparison and verification, etc.
Application Scenarios
Interface Introduction
Outline Dimensions
